Brite Electronics

• Connect the “IR receiver “into “IR-TX” port on transmitter, and “IR transmitter ” into the “IR-RX” on receiver, and make sure the IR transmitter aims at IR receiver of the controlled device if you need the IR control function.
• Full HD HDMI VIDEO AND AUDIO SIGNAL SUPPORT: Supports all HDMI features including full HD 1080p, deep color, lip sync and CEC. And the product also supports all high resolution multichannel audio formats including Dolby Digital Plus, 7.1 LPCM, Dolby TrueHD and DTS Master Audio.
• 20-60 KHZ WIDE FREQUENCY IR CONTROL EXTENSION: Let's think about a scenario. If you have a DVD player in your media room and a TV in your living room, while you are in the living room, you can still use your DVD remote to control the DVD player with IR CONTROL EXTENSION function.
• HDMI, USB and IR video extender. It consists of a loc moduleand a remote module that are connected by multimode or single mode fiber optic cable.

HDMI fiber extender is a device to use single mode and bidirectional fiber cable to transmit HD audio and video, the longest distance is 20km, and it support one to one and one to many mode.

Features
Support HDMI 1080p 60Hz.
It supports one-to-one or one to many transmission and can pass through fiber switch.
* Support single-mode single fiber LC, SC interface module, factory default is LC interface module.
* TX side supports HDMI loop out.
Support KVM function.
Support IP transmission.
* Pure hardware design, plug and play, no need to install additional software.

Specifications

HDMI input -1080p/720p/ 480p

HDMI output -1080p/720p/ 480p

Optical fiber wavelength -1310nm/1550nm; 1550nm/1310nm

Maximum power consumption -TX3.85w; RX3W

Power adapter specification -Input (50 Hz, 60 Hz) 100v-240 V; Output 5V/1A

Operating temperature range -(0 to + 45 C)

Working range -5% to 90% RH (non-condensation)

Pakage Include
1x HDMI fiber extender transmitter
1x HDMI fiber extender receiver
2x DC 5V power supply
2x IR cable
1x USB Male To Male cable
1x User's Manual

• 1: Connect the HDMI source (such as DVD, PS3, STB) to the “HDMI IN” of transmitter by HDMI cable. 2: Connect the “HDMI out” of Receiver to display by HDMI cable.
• 3: Connect the Transmitter and Receiver with one cat5e/6 cable (recommend). the furthest distance is 300M.(SET DIP number 1-4 must be dialed downward.)
• 4: Plug the IR receiver to the RX, and IR transmitter to the TX. Aim at the equipment which needs to be controlled if you need the IR control function. Multi-point to Multi-point pairing: when multiple TX and multiple RX connect with switcher and Multi-point to Multi-point pairing requested, please setting by SET dip switch or pairing the IP extenders by Web browser setting.
• 5. If the product is defective, or sent wrong or any problem,pls contact us timely for solution 5.Plug the mouse and keyboard into the USB port of the RX, and connect the USB port of the TX with the computer if you need the KVM control function.
• 6: Connect two pieces of 5V power supply to the transmitter and receiver, and power on Now the PWN indicator of the units is lightened; when the status indicator twinkling,link indicator light up, means the units start successfully.

• WIRELESS HDMI EXTENSION – It Combines high bandwidth capacity and strong error correction capability, to transmit HD video. it transmit the signal up to 150m in the open area, also go through the wall.
• SUPERIOR QUALITY – high-definition videos up to 1080p with auto-adjustment to produce the best video/audio experience. Features Super Low Latency. Supports LPCM 2-channel audio. *Note: Dolby Digital and DTS aren’t supported
• COMPLETE KIT – USB power and HDMI cables are included
• This HDMI Wireless extender users 2.4G and 5G modules to enable high-speed, high performance wireless communication among consumer electronics, computer and mobile devices.
• The Matching Code: Wireless Extender transmitter and reciver have been matched in the factory. if the users need to match again( for example, the matched transmitter/receiver needs to match with another receiver/transmitter), Then Follow the steps: (i) Transmitter and receiver connect to the power supply; (ii) Use HDMI Cable connect HDMI port of transmitter with the HDMI port of receiver, it makes about 10 seconds to complate the code matching.

• Extend your HDMI signals over Ethernet up to 60 Meters
• Supports Full HD Resoloution
• Support HDMI 1.4 protocol | Support Full 3D
• Ideal for CCTV, Broadcasting, Schools / Colleges