Brite Electronics

Connect your desktop or laptop to a wireless network
Wireless Modes: Ad-Hoc/Infrastructure mode
Frequency Range :2.4-2.4835 GHz
Spread Spectrum: DSSS
Standard :IEEE 802.11n,802.11g,802.11b
Modulation : BKSK, QPSK, CCK, OFDM(BPSK/QPSK/16 OAM, 64 QAM)
Transmission Power:17dBm
Antenna :Internal
Sensitivity @PE:11n:-70dBm@10%PER,11g:-70dBm@10% PER, 11b:-85dBm@8% PER Data Security: 64/128 bit WEP, WPA/WPA2 encryption Support: WinXP | Win7 | Win8 | Win10 | Mac | Linux Soft AP : Utility to create your own Wi-Fí Zone (AP mode)
Fully Featured Plug n Play Device
Latest Signal Processor for improved WiFi performance
Faster Transmission
Storage Signal Gain
Next Best to Wired Network
Lower Dealy on Games and Streaming Movies

• Frequency Range: 2.4-2.4835 Ghz. USB Interface
• Standard WiFi compliant 802.11n, 802.1lb and 802.11g
• Sensitivity: 54-68dBm @ 10% per, 11M:-85dBm @ 8% PER, 6M:-88dBm @ 10% PER,1M:-90dBm @ 8% PER, 256K:-105dBm @ 8% PER (typical value)
• Support Network Protocol: CSMA / CA with ACK
• Transmission Mode: DSSS
• Security Features: Supports 64/128/125 bits WEP Data Encryption,
• WPA Encryption, lEEE support 8021x, TKIP, AES Encryption
• Supports: Win2K /XP/Vista / Windows7/8/10/11/Linux

5G Dual-Band WiFi with Bluetooth 4.2 USB Adapter

This product is available in Windows 10 and above syst ems Plug and play no need t o inst all drivers. Ot her syst ems require t he installat ion of drivers before used.Operating instructions

1. Connect to the device's USB port, Win 10 and above systems Directly in the bottom right corner of the screen The wireless link shows that it is possible Search for nearby wireless routing signals and select the connection you want.
2.If the system below Win7 requires the installation of drivers, This product is compatible with the Realtek RTL8821 cu driver, If it is don't have driver, please contact the merchant to provide it or download it online. Connecting to PC USB, install the driver program. After installation, the bottom right corner of the screen Wireless link search for the wireless signal you want to connect to.
3. Set the wireless AP hotspot mode: Note: In this mode, It can only transmit and cannot receive, before set requiring your PC have connected to the Wired network This AP mode, surrounding wireless receiving devices such as laptops, Mobile phones, tablets, etc. can connect to this AP shared network. The method is as follows:
First, you need to finished install the Realtek software. In Software select "Access Point" in the mode options, and set it as an AP hot spot.
If you want to change to a mode that only receives and does not transmit, you can simply switch the mode in the program.

Soft AP FunctionNot only receive Wireless signals also can transmit signalfor notebook, smart phone,pad and so on.